D95 Compensator for Glock Gen 5-6

Leadtime – 2 weeks or less on all orders. Shipping instructions are sent via email once orders are placed.

$105.00

Precision-machined compensator for Gen 5 & 6 Glocks, 1/2×28 thread. Black finish. Reduces muzzle rise and keeps you on target. Ships ready to install.

Description

The Defiant Machine Works D95 is designed to fit the contour of the Glock Gen 6 AND Gen 5 slides. The D95 was made in collaboration with Herrington Arms using their proven and effective comp design but adding our aestetic touch. The D95 will work with the stock springs provided your gun has gone through our recommended break in period of 500 rounds of factory new ammunition with the threaded barrel you intend to use with the firearm before installing a compensator. We’ve found that this compensator has a 34% muzzle flip reduction depending on what 9mm load and Glock model is used.

Specifications

Material : 7075 Aluminum

Finish : Black Anodized

Compatibility :

Models: Glock 17/19/26/45/34/19x/47 (including the MOS models of) with 1/2-28 Barrels and must be GEN 5 or GEN 6 Glocks

Included : 5/64 Allen key – Steel replacement 8-32 set screw

Length : 1.0″ long

Holster Compatibility : Will fit in most open bottom holsters. We use Tier 1 Concealed, and Safariland.

Will not work with aftermarket slides.

Highlights

Designed to work with most 1/2-28 threaded 9mm barrels.
Made from USA-sourced 7075 aluminum.
Designed, assembled, and machined in the USA.
3 port design to mitigate vertical and felt recoil
NOT COMPATIBLE WITH SILENCERCO, BAR-STO, KKM, OR EFK BARRELS!
Works with all gen 5 and Gen 6 Glock 9mm models

AMMO DISCLAIMER: We DO NOT recommend using plated, bi-metal, or frangible ammo in ANY of our compensators. Doing so will void the warranty and we will not cover or replace the comp if there are any damages.

INSTALLATION INSTRUCTIONS

Make sure all threads are clean of grease, carbon, and loctite. Wipe the threads down till they’re clean. If the threads are not cleaned, the loctite will not set properly.
Only use loctite 243 on the barrel AND set screw threads. Some versions of the blue Loctite are not very strong and will not hold up. Feel free to use a generous amount.
Torque the set screws to no more than 18in/lbs.
Allow the loctite to set for 24-48 hours before using.
Please be sure that the compensator is not touching the slide, frame, or guide rod as that can cause cycling issues.

Restricted states: This product cannot be shipped to CA, NY, NJ, HI, IL, MD, MA, or WA.

In stock